More In This Section Click to reveal navigation links on mobile.
Who to make contact with
ITS Service Center
- Setup the projector dealing with the display, and plug when you look at the charged cord. Set your laptop beside the projector.
- Plug one end of VGA cable (shown above) to the COMPUTER 1 IN slot from the projector.
- Plug the other end for the VGA cable into the laptop’s monitor slot. It to your laptop if you have a display adapter for your laptop, connect that to the VGA cable before connecting.
- Switch on your laptop computer first. Then start the projector by very very first turning energy key to | and then push the most notable power button. The lamp will require one minute to heat up and show. When there is a display issue, continue steadily to step 5.
- Change your monitor ( click on the laptop computer type below for details): Windows InstructionsMacintosh Instructions
On the laptop computer, hold straight down the FN key and press the display key (the F key utilizing the monitor symbol) to alter your display.
You might be served with the choice to decide on what you would like to accomplish:
You may need to adjust the your laptop’s resolution to 1024×768 after you have set the display mode.
- Right-click in your desktop back ground and select qualities or Graphic qualities. -or-
- Click the Settings tab or General Settings and then make certain the screen resolution is defined to 1024×768. -or-
- Select Apply then OK .
- Maintain with # 6 below.
- Head to Apple menu>System choices.
- Choose Displays preference, go to Arrangement then tab.
- Select Identify Shows button.
- Check out the Mirror shows checkbox if you’d like the exact same display to show up on the projector.
- always Check Show shows in menu bar , select 1024×768 under then LCD Projector from the menu club pulldown:
You will need to choose Display Preferences… There will be a pane on your MacBook and a pane on the Projector if 1024×768 is not an option. Find the projector pane and set to 1024×768 utilising the cheapest frequency.
In the event that you nevertheless usually do not visit a display after following these directions, check out the source from the projector. Here are two various projector key arrangements:
Choose COMPUTER 1 input key
Choose SUPPLY key, use the arrow tips to pick COMPUTER 1, push the ENTER then key.
Once you are completed aided by the projector, please push the power that is top twice to permit the fan to switch on and cool off before unplugging the energy cord.
Then try switching the display once again if the projector is still not projecting your laptop after following the instructions above, check to be sure all connections are plugged in all the way, and hookupwebsites.org/uniform-dating-review. If you’re nevertheless not able to connect, please call x3407 for assistance.